1. Remove plastic cover around trunk latch. There are two plastic knobs on each side that you have to remove first; which are used to hold the trunk net in place. Then pull the plastic cover up and forward from body of trunk.
2. Take deep dish ratchet or pliers to remove the three nuts holding tail light assembly in place. Push whole tail light out and then remove appropriate bulb and replace with same.
3. Check that tail light and all other bulbs are working correctly before reassembling tail light unit.
Good Luck!
Check, or even better replace, the wires.
Fuse and/or switch Switch located at upper end of brake pedal under dash
mine on my 97 is on the rear window deck.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
2001 Oldsmobile Aurora brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
brake light on when driving oldsmobile alero
Check the brake fluid.
where is the brake light switch for 1996 Oldsmobile cutlas supreme
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.
There is no brake light relay. There is however a brake light switch located above the brake pedal.
A warning light on the dash would illuminate.