I think the standard answer, applies here. Remove the drive shaft. Using a tool, like a screw driver, or anything kinda pointed, and a hammer, pry between the housing and the seal, until you bend the outer flange of the seal enough to grab it with pliers, and twist it out. You can also, drill a small hole, in the flange, and screw in a screw, until the screw is in the flange far enough, that you can grap it with a pair of pliers and yank both of them out.
you have to separate engine and transmission
transmission.
2l
yes it will fit..both use the same transmission
Are you sure of the engine size? Should be 7mge inline six cyl. 22r wasn't offered in a 1990 cressida.
Yes. They both have the same 1ZZ FE engine and transmission
You can find the 1998 Toyota transmission diagram at your local Toyota dealership. Most auto-parts stores will have the transmission diagram.
Directly behind the Engine.
It calls for transmission fluid =]
you go to the Toyota place
The outfit where you are getting your engine should know if the transmission housing will bolt up to the engine.
The transmission dipstick is located to the left of the engine on a 1996 Toyota Avalon. It is near the oil dipstick.