Want this question answered?
Follow the top radiator hose back to the engine. This is where the thermostat is. Remove the 2 bolts and there it is.
It is in the housing at the engine end of the upper rad hose. When replacing it make sure the spring on the thermostat is toward the engine.
Thermostat is stuck open. Replace it.
Remove the top radiator hose. The thermostat is located under the hose inlet on the engine. Remove the inlet to replace the thermostat.
On a 1994 Ford Aerostar : Follow the TOP radiator hose from the radiator It will connect to the engine cooling thermostat housing The thermostat is INSIDE the housing * on the 4.0L V6 engine the hose actually connects to a metal pipe which is part of the thermostat housing
JUST BOUGHT A 1994 FORD ESCORT FORMER OWNER REPLACED STEERING COLUMN, IGNITION BRAKES NEW CLUTCH. WHEN I AM IDLING OR STOPPING AND STARTING MY ENGINE GETS HOT. WHEN I GO HIWAY OR GET GOING FAST MY ENGINE COOLS OFF. WHAT COULD MY PROBLEM BE. I THOUGHT MAYBE MY THERMOSTAT WAS STICKING UNTIL I REACHED HIGHER SPEED. CANNOT FIND MY THERMOSTAT TO REPLACE IT. JUST BOUGHT A 1994 FORD ESCORT FORMER OWNER REPLACED STEERING COLUMN, IGNITION BRAKES NEW CLUTCH. WHEN I AM IDLING OR STOPPING AND STARTING MY ENGINE GETS HOT. WHEN I GO HIWAY OR GET GOING FAST MY ENGINE COOLS OFF. WHAT COULD MY PROBLEM BE. I THOUGHT MAYBE MY THERMOSTAT WAS STICKING UNTIL I REACHED HIGHER SPEED. CANNOT FIND MY THERMOSTAT TO REPLACE IT.
follow hose from radiator to engine block. there are 2 bolts that hold the housing in place. BE CAREFUL when you re-tighten the bolts and do not break off the ears on the thermostat housing. and make sure the engine is cool and there is no pressure
the engine is a v6
How do I replace thermostat on 97 Ford van
Replace thermostat on 91 ford eacort
follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it
The Ford puma thermostat housing is on the side of the engine, with two hoses connected to it. Be sure to replace the gasket when installing the housing.