Want this question answered?
If the Ford-150 On-board diagnostics (ODB) is rendered with an error code that reads P0705 usually means the transmission range sensor (TRS) has expired. Remove the old TRS and replace it with a new one.
Carefully, and with a lot of frustration.
You have to first remove the transmission oil pan and the valve body. The Range sensor is relatively easy after that.
I'm not familiar with a 'shift position sensor', but think it might be actually referring to the neutral start switch, nowadays known as the transmission range sensor.If that's the case, see "Related Questions" below for more
Trs is transmisson range sensor-(neutral safty switch)
ford scpe 2001 transmission range sensor high condition
Inside the transmission, on the valve body. It is called a TRS (transmission range sensor).Inside the transmission, on the valve body. It is called a TRS (transmission range sensor).
There isn't a modulator valve on the 1998 Windstar. Its all electronics these days. What you need to look for is the Range Sensor that is bolted down on top of the transmission, just under the air breather assembly. You can see the black sensor when you open the hood just in front of the drivers side. I had just replaced this due to the transmission slipping out of gear while doing 50-60 MPH. Normally doing this speed, the RPM would be at 2000 RPM. When the transmission slips, the RPM shoots up to 3000 RPM and the Van goes out of high gear and looses power to the wheels. The Range Sensor for a 3.8 Litre is Part Number F5DZ-7F293-BA. It's the flat black sensor with an electrical wire harness connection. It takes approx.1/2 hour to replace. Very easy installation and very cheap $50.00 Cdn to replace. Good luck and hope it works. Jim
Inside the transmission, on the valve body. It is called a TRS (transmission range sensor).Inside the transmission, on the valve body. It is called a TRS (transmission range sensor).
The transmission range sensor is mounted on the drivers side of the transmission. It is bolted around the shifter shaft as it comes out of the transmission.
No, the range sensor reads what gear or "range" you have shifted into.A speed sensor reads the speed of an item.No, the range sensor reads what gear or "range" you have shifted into.A speed sensor reads the speed of an item.
The 2001 Ford Focus transmission range sensor is located on the side of the transmission. The sensor will be on the left-hand side of the transmission.