You have to remove all accessories from front of engine/belts. It will (should) be centered on block behind fan pulley. Just remove 2 bolts either side (usually) & it will come off. Gaskets will come with new one. Old one can exchange for core money back.. use silicone sealer on the gaskets. (The blue stuff)
If a 4 cyc, on the passenger side of the engine, seen from the top.
The Oldsmobile Calais, also known as the Cutlass Calais, was produced by General Motors from 1985 to 1991. In 1987, the Quad 4 engine was developed and the 1988 Calais was fitted with it. All?æof the Quad 4 14 engine types of the 2.3 liter version are interchangeable on the 1988 Calais.
changing the crankshaft sensor
"What is the firing order on an 1994 Oldsmobile cutlass supreme 3.4L engine?"
Not without a LOT of customization.
what year cutlass? and what engine?
What size engine? 3.1 or 3100? yes there is a difference. j1taylor@twcny.rr.com
Biggest engine was a 455 cu.in.
The 1987 Oldsmobile Cutlass Supreme was rated 350 horsepower with the with the V8 engine. It was last year that the Cutlass was a rear wheel drive vehicle.
I have an 89 Olds Cutlass Calais SL...and you add coolant, very slowly, to the reservoir on the passenger side of the engine compartment. A little coolant, a little water, a little more coolant, a little more water...you get the idea. mixing the antifreeze 50 / 50 to start with will cut down on the confuse...tuner1978
Noise coming from engine in Oldsmobile Cutlass could be as a result of an oil leak in the rear of your engine. This makes the gears to wear off leading to severe knocking noise.
The starter on a 1994 Oldsmobile Cutlass Ciera is located on the driver's side of the engine towards the bottom of the engine. It is behind the crankshaft sensor and the fusible links.