Front or rear?? 4x4 or 4x2??
24 mm i believe
it might have to be pressed in with a machine call and ask people
225 ft lbs
you just replace it
2 or 4 wheel drive makes a big difference. Need more info.
What is the tonque specs on the front wheel bearing for an 02 ford F150
special socket required to remove nut that retains rotor and wheel bearing. use impact gun . be prepared to repack and reset wheel bearing
pull the wheel, remove the bearing dust cover, remove the cotter pin, remove the castle nut, slide the hub off, take out the rear seal and bearing, knock out the races reinstall in reverse order. pack bearings and hub with good grease don't go cheap. oh it helps to remove the brake caliper for a first timer
Take the old bearing out, take it to a bearing shop. They can look it up. If they are .001" too small, you may have to get a new hub. The only other thing would be a metric bearing. Look and see where the truck was made. You could also use green lock tight to fill the gap and secure the bearing.
a quarter turn before you strip the nut out
wheel bearing bad, wheel imbalance, u joint problem most likely in taht order
first you need to state. 2or 4 wheel drive.next the year and if it is 4x4 with or with out lookout then we can help.