The best way to find out is go to your local auto parts store, ask for a haynes or chiltons manual on your vehicle. This will tell you everything you need to know about working on your vehicle. Make sure you use the proper torque specs & sequence on your bolts otherwise you will crack or warp the aluminum manifolds.
if you are going to replace the intake gasket you might as well change the head gaskets at the same time[it will cost you a little now but save you a lot later
The labor charge to replace and intake manifold gasket, on a 1999 Chevrolet Tahoe, is approximately $180. It takes approximately 2 1/2 hours to replace the gasket.
The Intake gasket is leaking, NOT THE HEAD GASKET. Replace the intake gasket
I'll assume Lower Intake Gasket, since they tend to cause vacuum leaks. Get a manual from Autozone and expect about 4 hrs labor, you need to take off the upper intake manifold just to replace the Lower Intake Gasket. Probably should change/clean the PCV valve while ur in there. Good luck, man.
take it to a mechanic
remove the air filter pan assembly and the 15-20 intake bolts clean gasket area replace n re bolt down
The only fix for a bad intake gasket is to remove the intake manifold and replace the gasket.
Probably a gasket leak. Could be the intake gaskets or the thermostat gasket.
NO. You MUST replace the intake gasket.
Yes, you must install a new intake manifold gasket.
Parts and labor aprox $600 to $700. It also depends on your location.
Replace gasket why does gasket keep sliding