There are two. Just remove the two phillip screws on the side that is blown and change the bulb.
Replace headlight bulb only when blown.
The bulb may be blown. Replace the bulb.
how to replace the license plate bulb on a 2004 Honda cr-v
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
Bulb is blown. Replace bulb.
how do you replace a honda crv licence plate bulb on a 2004
You have to replace it by crawling under the bumper. It may be handy to have a flashlight with you. Twist and/or pull the bulb out to replace.
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
This could mean that one of your bulbs is blown on that side. Check and replace the blown bulb.
open trunk, remove replastic trim/bulb holder, r/r (remove/replace) blown bulb See sources and related links below for bulb information.
Remove the two 10 millimeter screws and pull the housing down and replace the bulb
Find out why it is not working. Do you have 12 volts at the bulb socket. If not, then you have a loose or corroded connection. If you have 12 volts then the bulb is blown or not making good contact. The license plate bulb is wired into the taillight circuit and operates on the same fuse. So if your taillights work then the problem is between the taillights and the license plate bulb socket.