Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
I have a 94 not sure if they are the same but behind the license plate was mine Good luck Answer Improvement (Sept 5. 2010) Remove 4 license plate screws and licence plate Remove 4 hex head screws that hold the license plate/backup light assembly Rotate the license plate/backup light assembly around 180 degrees so you can get to the light bulb holders Carefully turn bulb holders 1/4 and remove bulb holder Carefully remove old bulb and replace with new bulb (#194) Reverse these step to reassemble
how to replace the license plate bulb on a 2004 Honda cr-v
how do you replace a honda crv licence plate bulb on a 2004
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
if your under miles its under warrenty
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
how do you change the light bulb over the license plate on 2000 eclipse
License plate like bulb, on a Citrogen Picasso, can be changed by pushing the bulb in and turning at the same time. The bulb will come out. Insert the new bulb.
Look above the license plate and find the bulb assembly, grasp the flat part turn it clockwise and pull it out, the bulb just pulls straight out.
License Plate Light Bulb Size: 6418