burn rubber out and cut shell out of the arm bushing holefreeze new bushing in freezergrease hole welltap or press new bushing into arm bushing hole
It is either the WRONG seal or the tailshaft bushing is worn out. Replace bushing and seal.
u have to pull the driveshaft knock out the seal and install a new one, but if it is leaking the bushing needs to be replaced and u would need a bushing driver to install it. u can purchace a seal and bushing kit but the bushing is harder to replace
There is no difference in the bushing. One is a 4x4 and the other is not.
very carefully
There are many bushings in most vehicles. Some can be replaced easily and some require special tools and equipment. It all depends on what year, make, model and bushing you want to replace.
You can just replace the pin/bushing. I found out too late. Paid 80 dollars for the whole cable and ended up just using the plastic bushing? Go to ATFspeed.com for replacement pin/bushing. 19 dollars
I am having the same problem and it turns out to be that the bushing in the control arm to the frame is shot. The control arm is not suppose to move at all. This will also cause tire wear. You can actually replace the bushing at an inexpensive cost however, if you try to buy the bushing kit from the Saturn dealer, they will tell you that you have to replace the control arm. That is very expensive. By the way , you need a press to replace the bushing.
Most new sway bar bushings are split so they can be R & R easily. Remove clamp from bushing, slip or cut old bushing out, slip new bushing in and replace bushing clamp.
$600-$1200
you don't -Buy a new one
need to replace door hindge pins and bushing,how do we get door off safely.