take the caliper off and hang it to keep from breaking the brake line. there should be some clips on 2 of the studs. you can break them off with some dykes or break them off with a srewdriver or chisel and hammer. you will need a impact wrench with a Phillips head. they're about $20 or so. you loosen the screw and take it out. the rotors should just pull right off.
how much does it cost to replace brakes rotors on honda crv
In may area around $150.
To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
The brake pedal switch is bad. How do I replace it?
It is possible to replace the brake fluid in a Honda Accord yourself, however it is recommended that you take it to a professional mechanic unless you have experience in the area.
Changing the brake pads on a Honda Accord is relatively simple. With a few simple tools, one can replace the pads in about one hour.
you take it apart and fix it
Adjust or replace the brake light switch.
AS A GENERAL RULE YOU GET THE ROTORS CUT OR RESURFACED BY A REPUTABLE SHOP. THERE IS NOT REPAIR THEY ARE EITHER THICK ENOUGH TO CUT OR THEY NEED TO BE REPLACED
It's called "brake chatter", and it's caused by warped brake rotors. Replace the rotors and the problem should go away.
where do I add brake fluid to my Honda accord 92