In order to replace the Foglight on a 01 Hyundai XG300 you need to first remove the headlight on whichever side the foglight is located on.
This is the easiest and cleanest way to get access to the foglight assembly.
As soon as you remove the bolts holding the headlight, please remove the wiring to the headlights, each headlight should have about 2-3 plugs.
You are not ready to remove the headlight, it simply just slides out. You will not have access to the fog light, you can look straight down and feel the fog light. There is 2 Phillips screws holding the fog light, remove those two. You will now be able to slip out the fog light assembly by pushing forward on it, slipping out through the front of the car, not the inside.
You can now open the cap to replace the fog light bulb and do whatever you need. I belive the bulb size is H1 or H3, you'll see it written on the bulb itself.
I , if you need more help go ahead and email me at:
oscar@spectrumwirelesscom.com
If you found this tutorial useful, feel free to donate to us via PayPal at: admin@duratecoa.com
Thanks!
Unscrew botton screw, then you have to gently pull off front grate and unscrew 2 top screws. The grate does not need to come completely off to do this. Just enough to work the lamp out. Disconnect wires & replace with new part. Reverse to install new lamp.
AnswerThis is something you should definitely take to a garage & let a professional handle! It'll cost around $500 to have the fog-light lenses changed due in part because they have to remove the front-end of the body to gain access.*Edited: Did you mean you should definitely NOT take it to a garage? $500 to replace a light is far too steep, when it's simple enough to do it on your own.
1) Headlight removal: Look under the hood to the front sides of the engine bay and unlatching the headlights. Unlatch the hooked metal clip that wraps around the headlight, and then lift the lever upwards while gently pulling at the lens from the front of the car. Once pulled forward unlatch the wiring harness from the back-underside of the headlight housing. Repeat on the other side to have both sides removed.
2) 6) Reinstalling: To reinstall the headlight first reattach the wiring harness onto the housing. Place the housing back into the whole in the front of your car and make sure the two pins on either side of the housing slide into the grooves on the inside of the hole. Put gentle pressure on the front of the headlight pulling pushing down on the lever on the inside of your engine bay. This may take some effort since it can be kind of tricky. Once seated in the car re-hook the metal latch around the inner housing and you are good to go.
An excellent forum for any 3000/Stealth is www.3si.org, if you search there I would bet you would have some luck.
look behind the foglight under the valance there are 2 screwes, remove the screwes and then you can get to the bulb and lead wire.
The fog lights on a 2004 Jeep Grand Cherokee are accessed from the wheel wells. Remove the rivets for the dust covers to gain access to the lights. Twist off the bulbs and replace them.
screw in a new 56w bulb
Responder a esta pregunta ...
Remove grill for better access. Then proceed to remove bulbs. The fog lights set inside casing. Unscrew them and replace bulbs. Return mechanism s and they should shine properly.
Where is the fuse locations? Interior and brake lights have gone out while attempting to replace fog lights.
The video available on youtube can help you replace fog lights in a 2012 camaro, however, you can also take your car to the workshop for your convenience.
Ebay
TAKE THE COVERS OFF THAT COVER THE FOG LIGHTS BY PULLING THEM OUT.gET A SREW DRIVER AND TAKE THEM OUT THATS IT.
The fog lights on a Chevy Malibu can be reached from under the car. Pull off the old lights and toss out the bulb. Replace with a new bulb and reinsert the light in the fog housing.
http://forums.maxima.org/infiniti-i30-i35/589286-how-remove-fog-lights-96-99-i30.html
form_title=Upgrade Fog Lights form_header=Replace your existing headlamps with a better and more efficient type. Is the vehicle already wired for fog lights?= () Yes () No Are they going to be installed in a low position or a normal position?= () Low () Normal What features would you like the lights to have?=_
It depends on the number that's on the fog lamp. It usually comes in H3 or H4
Take them out then put the new ones in
Pull out slightly on the headlight switch. If the fog lights do not respond you need to replace the switch.
The fog lights can be accessed from underneath the car. Crawl under the bumper and find the fog light housing. Pull the old bulb off and replace the bulbs.