First jack up the front of the truck and put a jack stand under it and block the back wheels so it doesn't roll. Be doubly safe and set the parking brake.
Next take off the tire. Then remove the two Allen bolts on the caliper the caliper wwilnow lift off. pull the pads out. Loosen the brake line and push the pistons back all the way and retighten the brake line.
Slide the new pads in. this also when if you want to the time to change the rotors these just slide off and back on once the calipers are re moved.Then bolt the calipers back on. Next bolt the wheel back on remove the jack and stands and you are good to go
NO.
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
You can obtain a break line assembly diagram, for your Chevrolet pickup truck, from most Chevrolet dealerships. You can also obtain the diagram from most auto-parts stores.
are brake lights staying on or is brake in the dash on ?
It is located just above the brake pedal pad.
How do I release the frozen brakes on the drum of a 1965 Chevy 3/4 ton pickup
I don't think you can. I've been looking for the same thing for about 3 years. I have not been able to find anything. Sorry.
need to replace the fitting, or remove it and put some plumers tape on the threads
Check the fuse, check the bulbs, then check the brake light switch.
Replace brake light switch.
which one the center or the side?