0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Remove replace half axle 1986 Cadillac?
buy a Buick
Can you put a f-150 half ton rear axle on a 1995 ford bronco?
you can if you can weld. the axle mounts are not the same
About how much does it cost to replace a cv joint on a 2000 eclipse and also how much is it to replace the half axle?
The average cost to repair a CV joint on a 2000 eclipse is about $125. As for the half axle, this might cost about $30.Ê
What are the replaceable parts on an axle from a 95 ford escort?
The only replacable parts on an axle are the axle boots. The axle constant velocity joints take special equipment to rebuild the half-shafts.
How do you change a half shaft on 2004 ford escape?
how do you replace half shaft on 2992 ford escape
How do you remove the right front axle shaft out of the differential on a 1992 ford F150 4x4 with a 5.8L?
How to remove the right side axle half on a 1995 f150
If your 91 Ford Escort Lx on the passenger side the CV joint still needs to go in about a half an inch and all the tranny fluid comes out there when the car is on a hill what do you do?
Sounds like the splines and or the "C" ring is damaged. Under normal circumstances the axle should snap into place firmly. Remove the axle and examine it. With a little luck only the axle is damaged and you can replace the axle with a rebuilt one.
How do you replace an oil pump on a 1997 Ford F150?
half inch..
How do you replace a 2001 ford focus heater core?
You have to take half the car apart to replace the heater core
How many rotations is a axel im skating?
there are 1 and a half rotations in a single axle, 2 and a half in a double axle, 3 and a half in a triple axle, and so on.
How do you replace backing plate on a 1999 Chevy half ton with out having too remove axle?
you dont without cutting the plate
How do you remove front half shafts on a 1999 ford escort?
By removing the outer hub from the axle and you put a pry bar between the inner axle and the C clip holding it in. The axle is really in there so use a huge screwdriver or pry bar.
