Not a easy job. The dash needs to be removed to gain access to the temp actuator. To many steps to list here. Recommend purchasing a shop manual for that vehicle if you intend on replacing the actuator yourself.
is a 1995 s10 2.2 have solid or hydrilic lifters
Unfortunally you need to remove the entire dash assembly in order to gain access the the blend actuator. Consider replacing the heater core while your in there only because the amount of work involved to do it later if it should leak.
The answer is at www.autozone.com. I'm about to replace mine this weekend.
The temp blend door. It is electrically controlled by an actuator. It is located behind the dash assembly.
you have to take the dash out.it's a big project.
Yes.
how to remove the door panel of a 1995 s10
check your answer
The heater temp blend door and actuator are located behind the dash assembly on top of the HVAC box. Unfortunately the dash assembly needs to be removed to gain access to it.
Pull the front dash bezel out that surrounds the cluster and the radio and the a/c-heater controls out and then remove the controller and replace the switch.............
You do not ,you replace it .
The temp blend door actuator is located on the HVAC unit behind the dash assembly. To replace the temp blend door actuator the dash assembly needs to be removed. This is a fairly large job with to many steps to post here. If you intend on doing it yourself I would recommend purchasing a shop manual for that vehicle. The manual will pay for itself after the first job.