The temp blend door actuator is located on the HVAC unit behind the dash assembly. To replace the temp blend door actuator the dash assembly needs to be removed. This is a fairly large job with to many steps to post here. If you intend on doing it yourself I would recommend purchasing a shop manual for that vehicle. The manual will pay for itself after the first job.
"Where is the heater controll valve on a 2001 Chevy S-10 controll Valve? "
The heater temp blend valve is located behind the dash assembly. The dash assembly must be removed to gain access.
Idle Air Control Valve
What engine???
The heater temp blend door and actuator are located behind the dash assembly on top of the HVAC box. Unfortunately the dash assembly needs to be removed to gain access to it.
The answer is at www.autozone.com. I'm about to replace mine this weekend.
If you are asking about the temp blend door actuator, it is behind the dash assembly, attached to the HVAC box. Removal of dash is required.
you have to take the dash out.it's a big project.
Yes.
The temperature blend door and actuator is located behind the dash assembly. The dash assembly needs to be removed to gain access to the blend door assembly.
The air control valve on a 1991 4.3 S10 is on the engine. Kindly refer to your usual manual to see the exact point, where it is located. The Idle Air Control is attached to the base of the throttle body.
Need to replace the valve cover gasket.