Want this question answered?
how to replace the license plate bulb on a 2004 Honda cr-v
how do you replace a honda crv licence plate bulb on a 2004
twist rubber housing a quarter turn pull out replace with new bulb
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
there should be little screws that you screw out and they pop out and you twist the bulb to remove it
Remove the screws that hold the covers in place. Replace bulbs!
I have a 94 not sure if they are the same but behind the license plate was mine Good luck Answer Improvement (Sept 5. 2010) Remove 4 license plate screws and licence plate Remove 4 hex head screws that hold the license plate/backup light assembly Rotate the license plate/backup light assembly around 180 degrees so you can get to the light bulb holders Carefully turn bulb holders 1/4 and remove bulb holder Carefully remove old bulb and replace with new bulb (#194) Reverse these step to reassemble
You need to unscrew the whole cover panel for license plate.
Ask your car dealer...
You need a torx screwdriver....
you buy a new one