Want this question answered?
how to replace the light bulb on the gear shift on 2004 tracker
To change the license plate light on a 2002 Geo Tracker, remove the light lens with a small screwdriver. Take out the old bulb and replace with a new one. Tighten the screws on the light lens.
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
turn the round gray part behind the light, remove the wire and pull the bulb out, reverse to reinstall
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
License plate like bulb, on a Citrogen Picasso, can be changed by pushing the bulb in and turning at the same time. The bulb will come out. Insert the new bulb.
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
how do you replace a honda crv licence plate bulb on a 2004
The light assembly is secured with two Phillips (cross-head) screws. Remove the screws, then pry the light assembly from the car. Gently flex the sides of the bulb holder to free the bulb. Replace bulb. Push assembly back into place replace the two screws
I have a 94 not sure if they are the same but behind the license plate was mine Good luck Answer Improvement (Sept 5. 2010) Remove 4 license plate screws and licence plate Remove 4 hex head screws that hold the license plate/backup light assembly Rotate the license plate/backup light assembly around 180 degrees so you can get to the light bulb holders Carefully turn bulb holders 1/4 and remove bulb holder Carefully remove old bulb and replace with new bulb (#194) Reverse these step to reassemble
if your under miles its under warrenty