Remove wheel; remember to block up front wheels as you need to take hand brake off. Remove wheel, undo 2 x 19mm bolts from rear of calipers and remove caliper off the disc, remove old pads, compress piston. The rear brakes have a slotted piston that needs to be turned clockwise to retract nd push piston rearward back into caliper. There is a special tool available at local autoparts store or you can try needle nose pliers. Replace pads and put caliper back on disc asnd bolt up.
I am paying $195 parts and labor in my 98 maxima
1991 Nissan Maxima 3.0 liter SOHC V-6 (VG30E)
Remove the light assy and screw it in from the rear.
yes as long as they are both sohc or both are dohc engines
they are the same
You may have to replace the headlight switch since your tail lights are tied into the same switch.
BIG JOB and you need to have the front end aligned before you drive it. TAke it to a garage.
The 1993 Nissan Maxima transmission is interchangeable with any 1991 through 1995 Nissan Maxima models. The transmission mounts might be slightly different.
5 bolt i think
Yes , the 3.0 liter V6 engine in a 1991 Nissan Maxima has a timing BELT ( P.S. - it is also an interference engine )
on the brake pedal