its pretty simple. jack the rear end up, remove the back wheels, knock the drums off [they usually come off with a little or a lot of pursuading]then once you have both drums off you will see little round plates with spearheads through them. the rounds pieces are slotted to fit over the spearheads when you turn them to line up.once you have those out pop the springs located in various places on the shoes and the shoes should come off in your hands. DO NOT DO THE SECOND SIDE UNTIL YOU HAVE DONE THE FIRST SIDE AS THE SECOND SIDE SIDE WILL BE YOUR REFERRENCE TO REPLACE ALL YOUR BRAKE PARTS FOR THE FIRST SIDE!!!!OLD SCOOL RULES. replace drums adjust the brakes and put your tires back on.most drum brakes are self adjusting these days so dont sweat the adjust brakes part too much. this pretty much applies to most drum[rear] brakes. remember, its the K.I.S.S. rules, always. [after old scool]
autozone.com
In order to stop the paint from peeling on your Chevy, you will have to sand down the affected area, and then paint over it with a new coat. If your 1982 Chevy pickup is peeling off, then it has been repainted. There is nothing you can do except to wax it.
undo bolts from firewall,drain coolant,unclamp hoses- pull core out,replace w/new, also replace hoses/clamps(you won't be sorry)
The Chevy S-10 is a Chevy Pickup truck. It is considered a compact pickup truck and was first manufactured in 1982. The GMC version of this truck was initially called the S-15 but was later named the GMC Sonoma.
Which engine does your 1982 Chevy Celebrity have? Is it the 2.5L 4 cylinder or the 2.8L V6? They are very different.
Could be a plugged up fuel filter.
Get a Haynes Manual for the bike. Go to www.xjbikes.com for further assistance.
If the car or truck is 20 years old then it is very righteous to get historical plates on it.
250 ci,305 ci, 350 ci, 350 ci (Diesel), 379 ci (Diesel) (1982).
If you are having trouble starting your 1982 Chevy pickup, common issues could be a weak battery, faulty starter motor, clogged fuel filter, or ignition system problems. It is recommended to check these components for any signs of malfunction and address them accordingly to resolve the starting issue.
The Chevy S10 were small pickup trucks which were made from 1982-2003. The axle nut size for an S10 is 36mm.
Yes it will fit in there. But it will never run. That 99 engine requires a COMPUTER to even run right.