you have to take a pair of vise grips, latch them onto the little dowels and then pull and twist till it comes out
Pull the valve covers off. loosen the rocker arms with out taking them all the way off. then you can turn the rocker arms to pull the push rods out. replace push rods, and tighten rocker arms back down and put valve covers back on
Yes they can depending on which ratio rocker arms you get.
to adjust the rocker arms you have to either tighten or loosen the top bolt on the rocker arm/arms that need to be adjusted. there is a specified torque for the rocker arms that you should follow to help you adjust the them
replace the hydraulic tappets in the rocker arms, valves are non adjustable.
what is the torque on 2.2 rocker arms and in what order
A rocker arm shaft is normally a long shaft with rocker arms attached to it, that provides the pivet point for the rocker arms (newer Chevy motors).
Roller rocker arms can be used with most any cam.
The 1985 Chevrolet Corvette rocker arms will have an adjustment screw on top of each rocker arm. Turning the adjustment screw will change the height of the rocker arm.
A rocker arm shaft is normally a long shaft with rocker arms attached to it, that provides the pivet point for the rocker arms (newer Chevy motors).
no
milk cows
Rocker arms are non adjustable unless heads have been reworked with aftermarket parts.