Inside the trunk, under the carpet behind the tail lights will be a whole bunch of small plastic nuts, running from one side of the car to the other. Take all of these plastic nuts off, and the whole tail light assembly will come off in one large peice. Find the bulb you need to replace, and reasemble.
you can take the tail light out by unscrewing the wing nuts in the trunk, when all wing nuts are off pull the tail light out then take the light bulbs out to replace the tail light.
You have to remove the instrument cluster to get access to the bulbs.
the screws come off and you replace it
Replace the whole light assembly Their are no bulbs it is neon light
The bulbs screw in from the rear and if you can't get to the rear, you have to take the light assy off.
you remove plastic red/white cover with 2 screws and remove bulbs.
When changing the lights on a 1995 Acura Integra remove the dash on the center console and pull it off. Remove all the accessories and reach the old bulbs. Replace the bulbs.
Most tailight bulbs and tail light assemblys are accessible inside the trunk many are hidden behind carpet and or a plastic or fiber panels. , EzForJesus
no
Open the trunk....inside the trunk, on the back side are plastic covers that you can remove...there you will find your bulbs....find the brake light bulbs and remove them and replace them with new bulbs, then replace the covers. Don't forget about the 3rd brake light ...check it to see if new bulbs are needle. Also, if all of your brake lights aren't working...all at the same time...you might want to check your fuses. If replacing the bulbs and checking the fuses doesn't do the trick, the next step is to check the brake light switch above the brake pedal. And lastly...depending on the age of the car, and the last time you replaced your bulbs...you might want to check all those bulbs
Remove access panel in trunk area--Wing nuts should release taillight assembly and bulbs twist out
I'm guessing that all of the light bulbs have been checked and are good. It's possible that you need to replace the flasher.