Take the neg battery cable off then the serpentine belt then the wiring for the altermator and finally the mounting bolts. There should be a schematic for the belt on the fan shroud.
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
how do you replace seatbelt retractor on a 2000 chevy blazer
You get a pro to do it.duuuhhhh
I have a leak on my drive shaft left front 2000 cheve Blazer I would like to replace the whole unit
read the manual
It is metric. Probably a 13mm and a 15 mm.
Yes. I own a 2000 Chevy Blazer.
How do you set the timing on a 2000 Chevy blazer (V6)
Yes you do. There is no other way.
Yes, a 2000 GMC Jimmy hood is compatible to a 2000 Chevy Blazer. This is only on the S10 Blazer though.
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
You can but you still won't be able to get it out.
Ain't no fixin it, you have to replace it with a new one.
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
The 2000 Chevy Trail Blazer doesn't have a timing belt.
Disconnect the negative battery cable from the battery.
No it will not work, Is it not the same.
NO it will not. They are complete DIFFERENT designs. Will NOT interchange.
Length of back brake line to replace. hole in it between front and back door
It should take less than an hour.
the 1996 and 1997 are the same and would not work in your 2000 straight from GM
To replace an ignition switch on a 2000 Chevy Blazer remove the lower steering column and dash. Locate the ignition switch and pull the end-clip off the main harness. Remove the mounting screws from the ignition cylinder and replace the unit.
A 2000 Chevy Blazer is a GM vehicle. Vehicles made by GM do not come equipped with an inertia switch.
Mine is 19 gallons Chevy Blazer SS 4.3 yourgastankguide.com