answersLogoWhite

0


Best Answer
Copy

I have a 98' Cavalier and you must pry and pop a clip off of the rod sticking out of the passenger side seat where the hinge bracket is. Once the clip is removed (be careful it is only plastic)the back oof the seat can be slid about 1/2 an inch over towards the passenger side, causing the rod on the opposite side of the seat to be released from it's hinge bracket. Then simply lift the back part of the seat on the drivers side about 1 inch ( with the seat folded forward all the way)and jiggle very slightly as you pull outwards, towards the drivers side. That should do it. Hope it's helpful to you! Answer I have a 98' Cavalier and you must pry and pop a clip off of the rod sticking out of the passenger side seat where the hinge bracket is. Once the clip is removed (be careful it is only plastic) the back of the seat can be slid about 1/2 an inch over towards the passenger side, causing the rod on the opposite side of the seat to be released from it's hinge bracket. Then simply lift the back part of the seat on the drivers side about 1 inch ( with the seat folded forward all the way)and jiggle very slightly as you pull outwards, towards the drivers side. That should do it.

User Avatar

Wiki User

โˆ™ 2016-08-20 00:12:05
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +5 pts
Q: How do you replace the back seat on a 1997 Chevy Cavalier?
Write your answer...
Submit

Related Questions

Change key cylinder in 96 Chevy cavalier?

i have a 1997 chevy cavalier the wipers and radio work when turn the key swich back


Where is the fuel filter located and how do you replace it on a 2003 Chevy Cavalier?

Usually underneath near the back axle.


How do you replace an alternator in 2003 a Chevy Cavalier?

Begin by removing the 2003 Chevy Cavalier alternator belt. Remove the wiring from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.


How do you replace alternator 2002 Chevy Cavalier?

Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.


How do you install the back seat of a Chevy Cavalier?

NEED help is there a diagram with the bolts in the backseat of a 1998 chevy cavalier?


Where is the starter on a 1997 Chevy Cavalier?

on the back side of the motor Is it a RS or LS? Mine is on the front, close to the radiator, on the underside of the car. Thank god if I need to ever replace it I don't have to remove a bunch of crap to get to it.


How much should it cost for front and back struts for a 2002 Chevy Cavalier 2.2?

It is important to know the cost of replacing parts on a car. For a 2002 Chevy Cavalier 2.2 it will cost between $200-$400 to replace the struts, is a person is doing it themselves.


Chevy cavalier Will they bring it back?

nope its the cobalt now


Will a 2.0 liter engine and the transmission from a 1984 Chevy Cavalier fit in a 1992 Chevy Cavalier?

That is referred to as "back dating" and it is illegal at the federal level.


Where is the PCV valve located on a 2002 chevy cavalier?

The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.


Replace brake light bulb on 1997 Chevy silverado 3500?

remve the tail light they are on the back side.


How do you fix a 1997 Chevy Cavalier trunk latch?

Pull down the back seat then insert a screwdriver in the hole in the middle of the lock mechanism and turn it until the trunk opens. On the left side of the mechanism is a plastic box that probably broke, replace it.


Where is the oil filter located on a 1997 Chevy Cavalier?

Just below the powersteering fluid resevoir, on the back side of the engine. I had a hard time finding it also.


How do you replace the rear speakers in a 2003 Chevy cavalier?

Reverse the process to install the newYou will need to remove the covers from your 2003 Chevy Cavalier rear speakers. The covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.


How do you replace the fuel pump in a 2003 Chevy Cavalier?

The fuel pump is inside the gas tank Take it to a qualified mechanic Itll take about 2 hours to replace on a lift 5-6 hours or your back


Size of 2004 Chevy cavalier door spaeker?

front 4x6 back 6x9


Where is the crank position sensor on a 98 Chevy cavalier 2.2?

In the back by the coil pack.


How do you change the rear right blinker on a 1999 Chevy Cavalier?

From inside the trunk pull back the carpet and get access to the tailight assembly. Remove the fasteners on the tailights then unscrew the bulbs and replace.


How do you replace the thermostat located on a 1997 Chevy Cavalier?

the thermostat is located behind the water pump. there are 2 8mm bolts holding it in. unscrew, pull old thermostat out, put new one in and put back together. Simple - 9 I would have given it a 10 but the bottom bolt can be a pin to get to.


Where is the fuel filter located on a 1997 Chevy Cavalier?

it's right next to the back axle under the car. behind the gas tanks, round looking with lines running into both sides.


Where is the knock sensor for a 93 cavalier located?

The knock sensor for the 1993 Chevy Cavalier is located in the back of the motor. It can also be located in the engine valve.


Where is the heater resistor on a 2003 Chevy Cavalier?

There are heater-resistance wires in the glass of the back windshield.


How do you remove the rear speakers in a 1994 Chevy cavalier?

Remove the rear speaker covers in your 1994 Chevy Cavalier. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the rear speakers.


Where is the O2 sensor located on a 2002 Chevy Cavalier Z24?

The 2002 Chevy Cavalier 02 sensor can be found attached to the air cleaner housing. The O2 sensor will be on the back side of the air cleaner housing.


Fold down backseat on a Chevy Cavalier?

The back seat of a Chevy Cavalier is a split bench seat. The release for the seat is located in the trunk behind the split. Simply pull the release and fold the seat down.