The EGR on the 95 Century is on the drivers side, towards the back of the engine.
1. Unplug the triangular electrical connector on top of the EGR.
2. Remove the two 8mm bolts that secure the black shroud protecting the linkage to the air intake. If I wasn't clear enough, just look at the front bolt on the EGR, you'll see that the black shroud has a slot that shares the same front bolt and has to be moved out of the way to R&R the EGR.
3. Now all you have to do is remove the front and rear bolts on the EGR and you can then pull it up and off.
4. If you made it this far, just do the same thing in reverse with the new valve,
Be sure that your gasket is aligned before you tighten down the valve.
I hope this helps you out.
BTW, the entire operation took me just 10 minutes to complete, it's a piece of cake.
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
I have a 1995 buick centruy and I can move the gear shift lever, but cnnot get the car to move in drive. I have checked the fluid level and it is okay. Is there a cable that is loose or out of adjustment ?
driver side valve cover
the pcv should be near the front valve cover
Take it to a Buick Dealership
How TO REPLACE THE TRANSMSSION: CALL A MECHANIC
To replace the fuel pump on your 1995 Buick LeSabre, you must remove the fuel tank because that is where the pump is located.
Locate transmission modulator 95 Buick
how to replace master cylinder on 1996 buick regal
take it to the shop
there is no fixing you have to replace the rack and pinion
get a new car!