The electric window switches in 1999-2005 Mazda Miatas can be pried out with a flathead screwdriver after the center console is removed.
The center console can be removed by removing:
1. 1 screw on each side side of the shifter, covered by plastic screw covers
2. Screws in the center console
3. On 99-00s, remove the ash tray for the last screw
Remove the center console, you'll here a small "snap" towards the front that is connected to the dash.
Flip it over and you'll see how the window switch is attached with electrical harness.
By now, the electrical windows switches have become very brittle with age. It is not uncommon for the plastic tabs to break, that held the switch in place. This can be fixed by wrapping 2-3 layers of electrical tape just under the lip of the switch, which will create a nice, friction fit for it to be replaced.
blown wire/fuse
GO TO WWW.EHOW.COM AND IT WILL EXPLAIN EVERYTHING TO YOU
in the hand part where you close the door theres a screw, take it off, pull the assembly from the top by the window switches, when it comes out the wires will follow, disconnect the harness, and replace with the new power switch. (note this is the drivers side)
replace it
how to replace window motor ion 91 madza miata
The two way switch in your console is dirty. Remove it, disassemble, clean the contacts and reinstall.
pritt stick
The backup light switch is located on the left side of the transmission. Disconnect the switch connectors, then unscrew the switch.
how i can chek my cigarret electric conection, i replace the fuse but i dont have power on the cigarret conection
Generally whenever a switch goes bad the only thing you can do is replace it.
The switch is bad contacts inside it are corroded or dirty.
smash the window and then put a new one in simple