loosen the lug nuts Jack up one side of the car, "e brake should not be on" remove tire. On the back of the caliper "caliper is what hugs the rotor" there should be 2 bolts loosen those two bolts and pop out the old pads, replace them with new ones. Make sure that the pad with the black clip is on the inside .. "back of the caliper". tighten the caliper bolts... CRITICAL STEP YOU MUST BLEED THE BRAKES!!!! There is a small bolt on the b ack of the caliper, looke like a little nipple "usually a size 8mm or 10 mm" loosen the bolt, have some one pump the brake, They should pump the break until you have a long steady spray. when you have the long steady spray tell them to hold down the brake. tighten the bolt
Replace axle on 2001 buick Lesabre
AnswerFront or rear?front
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.
33 Ft lbs
Your hands, your hands
Whats the procedure for replacing a 2002 Buick Lesabre front strut.?
I have a shimmy or small vibration while driving the interstate on my 1994 buick lesabre - if i was to check the front and rear bearings - how would i do that and what would i look for
I want to try and remove and replace my front struts on my 1995 buick lesabre is there a chance of seeing on line pictures of how to?
118 ft lbs 1997-2004 Buick LeSabre
Front wheel drive
yes
5.25"