Brake Pads and Rotors
Pontiac Sunfire
Ford Expedition XLT
Ford F-150

How do you replace the front brake pads on a 2003 Pontiac sun fire?


Top Answer
User Avatar
Wiki User
2005-10-24 01:07:03
2005-10-24 01:07:03

carefully take the bolts out of the back of the calipers and should be springs that hold the brake pads in just rasie them slightly and slide the pads off and then slide the new ones on and they should lock into place. becareful because you'll have to bleed the brake lines in order to take the calipers off and then to put them back on too.


Related Questions

To replace the brakes, lift the car on a jack, remove the tire, brake shoe and old brake pad. Next put in the new brake pads, put the brake shoe and tire back on the car, and lower the car.

how to change front brake pads on a 2003 neon

video on how to replace parking brake cable in ford escape 2003

Unless the caliper is broken, you can just replace the brake pads.

You will need to remove the front tires. Remove the brake assembly spring. The brake shoes will come off. Reverse the process to install the new brakes.

Remove brake caliper and caliper frame. Rotors are now free.

You need a 7mm Allen wrench for the caliper bolts.

The most common cause of that is the front brake rotors are out of round / warped. Replace rotors are have them turned.

Remove the tire and wheel. Remove the brake pads and the brake assembly. The brake rotor will come off. Reverse the process to install the new rotors.

The front have pads, and the back have drums. If you are needing to replace them, they cost around 60. What is it you needed to know?

take the wheels off, unbolt the brake calipers and the pull them off and now you can just pull the rotors off.

how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up

To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.

Your front breaking pads are needed to be repalced, you might have to replace rotors.

You can replace the front bearing on 2003 Citroen Relay using air tools.

what tools do i use to change the front brakes in my 2003 Pontiac grand prix

When you put the van in gear the brake should pop up. You have to have your foot on the brake before taking it out of park.

how do i remove the brake rotors for a 2003 Toyota tacoma v6 2wd

How much does it cost to get brake pads repaired on VW 2003 Passat

to change brakes on a 2005 trailblazer do i need a star bit to remove cailber pins

how do you remove the back seat in the 2003 poniac grand am

To replace the front brake pads on a 2003 Mitsubishi Galant you will only need a few tools. You will need a jack, tire blocks, a large C-clamp, and a 14 mm socket.

the answer to this is questions is get on the floor

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.