I believe it is accessed from its back, under the hood, next to radiator. you will seea little plastic door/cover. Press down pop off. Inside are the halogen bulbs, which are kept in place by a little spring clip. Press together to release. Use a flash light ant what to do becomes obvious. Very easy job.
You have to pull off the front bumper 1st. Then after you pull off the front bumper, then you have to disconnect the whole light from the car. After that you can replace the bulb.
How to replace fog light bulb for acura rl 2002
Tools needed to replace front brakes 2002 Ford Focus?
Unplug the whole light assembly from the bottom front of the car it just pops out to replace the turn signal bulb-same on the rear but you have to remove the trunk lining first.
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
You can replace the dome light bulb in a 2002 Chevy Cavalier by first prying the dome light cover off of the light. Then, remove the bulb and replace it by twisting the bulb from the socket.
how do you replace ambient light sensor on 2002 silverado
how do i replace front wheel bearings on golf 1.6 2002 model
can you cut the rotors on a 2002 acura
Open hood, there will be 2 black metal slide locks in the back of the light assembly. After that, work the light assembly out the front, disconnect the plug and change out the light.
If it is anything like the 2002, it is spring-loaded. You push in the front edge of the light, and slide it toward the front of the bumper. The rear tabs will unhook. and you can work the lens out of the hole.
wjjeeps.com . they show how to replace every light and with what bulb