Hi,
The hard part about changing the turn signal bulb is getting the light assembly out. But that is not really that hard. There are three "wing nuts" that hold the turn signal and headlight assemblies to the frame of the van. You have to remove the wing nut that is closest to the outside of the van and then pull the turn signal and side marker assembly straight out. This will allow you access to the bulb sockets at the back of the assembly.
At that point you just remove the socket, pull the bulb straight out, and put the new bulb. I always like to test that the bulb is working before putting things back together. Once you have verified that it works, line up the tabs at the back of the assembly with the frame hole and push it back in place. Then reinstall the wing nut and you are all set.
There should be a link on this page that shows pictures of this area and the operation. Take a look!
Good Luck.
No.
On a 98 venture the starter is located in front and just under radiator. Simple to reach and change. I learned the hard way.
there is no lower intake gasket, only a front and rear gasket
You need to be more specific. What year is your Chevy Celebrity and is it on the front or rear of the car?
hook back the horn 1994 chevolet lumina
The front turn signal assembly will pop out with a little help. It is held in place by clips that snap it into place.
the are supposed to be behind the front bumper
my heater fan in front of my 2004 chevy venture van wont work
Should be if undamaged.
The air bag module on 2002 Chevy venture is located between the driver side front seat and the passenger side front seat under the carpet
The correct tire pressure for a 2000 Chevy Venture is 32 psi front and rear. This is for the original tire sizes of P215/70R15 front, and P225/60R16 rear.
trouble putting right front signal bulb in.