Take the back seat bottom cushion out (2 clips under the cushion) Once that's out of the way, you will see a panel with 4 screws and a wire harness coming out of it. Obviously unplug the harness and unscrew the screws. You should now see the top of the fuel sending unit. There will be the fuel sending line and a return line going into it. There should be fuel pressure unless you have already relieved it. I just used a 20 oz bottle to catch the fuel that's still under pressure. After you've got the hoses off, there will be about 8 very tiny screws. Take those out and youre fuel sending unit is free. You should see how to simply replace the pump. Make sure the gasket is properly seated on the fuel sending unit when you reinstall it!!
Ok well the ford probe discontinued production in 1997. On all Ford Probe models the fuel pump is located in the gas tank. So to service and or replace it you have to drop the gas tank. Not fun
Were do I locate the fuel filter on a 1993 Ford probe 4 cylinder
In the fuse panel in the engine compartment Relay # 21 is the fuel pump relay on a 1996 Ford Probe ( Helpfull )
No need to match it to any other pump. Just purchase a fuel pump for your Ford Probe and it will fit and work. You for sure do not want to install a used fuel pump. Way to much work to change it out.
Most are in the fuel tank or above the tanks.
in the fuel tank
It is Inside of the fuel tank.
it is located inside the fuel tank
Absolutely not.
Remove fuel tank for access
take it out of the top of the tank and replace it or seal the tank off and go with a aftermarket inline fitler
in the tank