Open hood
Remove front bumper
2 10mm bolts holding the bumper to each fender at each corner of the corner.
5 phillips head screws holding the bumper to bumper support at the top of the bumper.
undo all the screws/bolts holding the bumper to the under splash shiled.
undo the turno/bumber signal bulb signal bulnbs
2 on each side 12mm bolts holding the bumper support to the radiatoror suppport.
then behind the battery/cruise control: is 1 10/12mm nut holding the stud to the radiatory support, then you take it off, and install in th reverse order
Remove headlight.
How do you replace the fuel pump Honda prelude 1992
yes it can but you need to change te harness, do you have the concealed headlamps for sale or something?
you dont there's no filter trans flush only
Go to the library and look up the automobile and you will find the instructions in the book or ask for instructions on computer
the ecu should be under the carpet on the passenger side. unplug the old one and plug in the new!
The easiest answer to this question is "www.installdr.com", there is a complete .pdf including diagrams on how to install the stereo for a 1992 prelude.
See below for instructions.
take out the light bulb
Prelude to a Kiss - film - was created on 1992-07-10.
I'm not sure what you mean here...are you wondering what tire size is on a 1992 Honda Prelude? Or, how do you get to the spare tire? Or, how do you remove a tire?
The front seats should be compatible. The rear seats were designed differently between 1992 and 1995, so no on that.
A 1992 Prelude does not have a transmission dipstick. It is completely sealed and to check the transmission fluid, a person has to unscrew a bolt on the side.