Want this question answered?
the headlight assembly needs to come out in order to replace the bulb.
The headlight assembly is only held on by a couple screws and can be replaced in a couple minutes.
The headlight assembly on a 1998 Acura Integra is held on by brackets. To remove them loosen the bolts on the brackets. Pull the housings off. Install the new housings by placing them on the brackets.
the headlight assembly needs to come out in order to change the bulb ive had to do that to my 98 as well.
Begin by removing the wiring harness from the back of your headlight. Remove the headlight assembly retaining bolts. The headlight assembly will come out.
Open the hood and notice the two black locking tabs sticking up behind the headlight assembly. Remove those two tabs by pulling on them straight up. This will allow the complete headlight assembly to come out the front. You can now remove the headlight bulbs from the headlight assembly.
There is no 1998 CTS
We have a 1998 Bounder Motorhome (with ford engine) how do we replace the headlight switch?
how to replace a 1998 Mazda millenia alternator
are you trying to change the entire headlight assembly? or just the bulb.
Open hood, look at the back of the assembly and locate the 4 hex bolts that hold the unit in place. Remove the bolts, slide the unit away from the body, and disconnect the wiring harness. You can also access/remove the turn signal unit when the headlight assembly is removed by sliding it forward and disconnecting the wiring harness. Reverse the process to install. This reply is good for both the 1998 S70 and 1998 V70 with headlight wipers. Note that there is a tab along the bottom edge of a headlight assembly for the wiper blade to rest upon.
Standing in front of the bad headlight assembly with the hood open notice the two black tabs sticking up behind the headlight assembly. Those two tabs lock the headlight assembly in place. Remove the tabs by wiggling and pulling straight up. Once the tabs are out you can wiggle the complete headlight assemble out the front. Now you can remove and replace the bad bulb.