answersLogoWhite
Headlights Tail and Brake Lights
Pontiac Firebird
VW Golf GTI
Ford F-150

How do you replace the headlight bulb located on a 1995 Pontiac Firebird?

323334

Top Answer
User Avatar
Wiki User
2015-07-15 21:17:42
2015-07-15 21:17:42

Under the hood, there are round turning knobs that allow you to manually lift your headlights. Turn them all the way (I don't remember if it's clockwise or counter-clockwise) and you should see the headlight opening up. Once it's open, it should just be a matter of unscrewing the outside bracket (leave the inside bracket that's surrounding the headlight intact) and replacing the headlight.

Replacing the headlight is not an easy thing to do but it's not real complicated.

ed by a female!!

1

Related Questions

User Avatar

HOW DO YOU GET THE LEFT TURN SIGNAL BULB OUT ON A 2000 PONTAIC FIREBIRD

User Avatar

Don't replace the headlight motors, you'll only be wasting your money. Instead, just rebuild them by buying the headlight motor rebuild kit. Check out these links. http://www.bfranker.badz28.com/headlightfix/ http://www.rodneydickman.com/index.html

User Avatar

There are bolts surrounding the headlamp. remove these and the wires.

User Avatar

The EGR Valve on a 1999 Pontiac Firebird is located just to the left of the engine oil dipstick. There's nothing in the way so it's pretty easy to get to and replace. Hope this helps! -Erin

User Avatar

There is 2 large plastic screws that hold the headlight assembly`s in. Simply unscrew them and lift the headlight assemblies out then unhook take the bulbs out.

User Avatar

how do you replace headlight bulb in a 2001 celica gts

User Avatar

You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.

User Avatar

The bulb itself is removed by unscrewing it from behind the lense under the hood.I hope this helps you. Mark

User Avatar

Copy and paste this link into your browser. http://www.bfranker.badz28.com/headlightfix/ It will give you all the info you need for replacing the headlight motor. I would suggest purchasing the CNC milled metal gear, as the gear that comes stock with the headlight motor is nylon and has a tendency to get stripped.

User Avatar

Pull out the old flasher (located under dash pannel above brake pedal, above the horn relay) and put in the new flasher.

User Avatar

replace headlight Pontiac MontanaAssuming it is the same as my 1999, there are two "wing nuts" securing the entire plastic headlight assembly. One is mounted at the top-inboard(towards engine), And the other is outboard of the assembly. Once these two wingnuts are removed, carefully remove the whole assembly. The headlight bulb is contained in the socket... one quarter turn counter-clockwise will remove the socket from the housing.

User Avatar

If you mean the whole headlight assembly, the following link will work for you. It helped immensely when I had to take the whole assembly off my 98 to replace the lift gear. http://www.bfranker.badz28.com/headlightfix/

User Avatar

The Plastic Gear Inside the Headlight is Worn, atleast half of it. You can buy a metal gear for $40 and replace the plastic gear.

User Avatar

control module~! i had that problem i replace it and it runs like a dream!

User Avatar

There are bolts surrounding the headlamp. remove these and the wires.

User Avatar

Begin by removing the wiring harness from the back of your 1997 Pontiac Bonneville headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight.

User Avatar

This site has a step by step guide for an older Firebird, but it is identical to what you need for a 2001. http://shbox.com/page/windowmotor.html

User Avatar

How do you replace a 1999 Ford Escort headlight - could use a picture.

User Avatar

go to back of headlight assembly and twist it out.

User Avatar

yes but you will have to replace the computer with one from a v-8 car

User Avatar

If it's the same as a 96 Pontiac Grand AM GT, than you would need a 10mm socket and rachet there are three bolts on top of headlight remove these and just pull out headlight. Disconnect the wire going to the bulb you want to replace.

User Avatar

Open the hood and there are screws on both sides loosen then move flaps and pull light backwards until you can get to the bulb.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.