What year or chassis is the 525? If it is an e34 (1989-1996) the lenses cannot be easily replaced and involves using a heat gun or to remove old lenses and gluing new ones on. The whole assembly can be replaced but it is not cheap.
how to replace the headlight
replace the light module
If you're talking about the headlight, the "lens cover" is not a separate part, you need to replace the whole headlight assembly.
I assume you mean HEADLIGHT LENS.. .. there are 3 bolts on the back, remove, pull out headlight. Remove clips and broken lens. Replace gasket, lens and put on clips FRONT TO BACK so you don't chip the lens. Reinstall with 3 bolts on back.
The lens can not be replaced alone, you have to replace the whole head lamp assembly
There aren't headlight covers, it all one unit. One of my lens was cracked and I had to replace the whole unit.
You must replace entire assembly. If your problem is just foggy lenses, you can get lens cleaning solution at auto parts store.
You don't. Instead, you replace the entire assembly.
Where the lens meets the housing there is a seal, just replace it.
The lens itself is part of the composite headlight assembly. It all has to be replaced as a unit.
To change a Honda 300 Fourtrax headlight, first unscrew the lens and remove it, twist the bulb out of the socket, insert a new bulb and then replace the lens.
If a plastic lens, drill a very small hole at the bottom to let water drain out. If a glass lens, you will have to replace.
Take a hammer. smash the headlight assy. lens. Remove old bulb, put in new.
If new style you need to remove grill-easy to do- then you see that the light globe is easy to replace.
how do i remove and replace my fog lamp bulbs on my 2006 bmw 525i
its not a lens, there are some decent quality replacement ones on eBay or at vwspecific.com (their site sucks, just email them)
If you want to remove the BMW headlight lens simply follow the user manual.
I think the lens cover has snaps along the top and sides of the lens cover. It also looks as if you would have to loosen the turn signal unit that sits beside each headlight. The headlight lens cover is tucked into a recess along the turn signal unit. It doesn't look as if you would need any tools to remove the old lens covers, but you may need a screwdriver to loosen or remove the turn signal unit next to the lens.
i have dropted the bulb into the headlight and i want to remove the lens to get it out any ideas thanks
They are the headlight washer covers. If you have headlight washers, these covers lift when you activate the windshield washer.
Actually.. to take the headlight lens apart, put the Oven on 200, put the headlight assembly in oven for a few minutes at a time, as the headlight assy heats up, the adhesive will loosen up making it easy to remove the lens. For a demonstration, go to Youtube and type in "How to remove headlight lens from assembly"
It is quite a chore. The various Volvo forums have detailed instructions, the quick answer is you have to pull the front fascia off the car to get to the lens assembly. Once there, there are some clips that hold the lens on.
how can I replace headlight glss
After you take the headlight out, remove the metal clips holding the lens on. The lens has to be pried off because there is silicone there to keep it together
you can't. You have to replace the whole headlight assembly, it doesn't come apart. check the junk yards or eBay it's cheaper.