take the plastic of from the passenger side underneath the dash.. the blower motor is up under their tucked away.. but you can get it after a few hrs of work..
Probably not, but it will certainly cost in fuel, performance and excessive emissions.
replace heater core in a 1991 Chevy work truck 1500
The heater blower motor can be found beneath the passenger side dashboard. Remove the wiring harness from the back of the blower motor. Remove the blower motor retaining bolts. Reverse the process to install your new blower motor.
how to add coolant to 1991 lumina?
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
First umplug the heater motor. If is doesn't blow, replace the motor . If it does, you have a short in the wiring. You probably have a bad motor, and, you need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
Replace your heater selector switch
replace or repair. It will only get worse.
how to fix 92 camary heater core
Should be able to access by removing inner door panel
no fuse check your anti-freeze level
replace the heater core
Under dash board on passenger side.
replace one side at a time, take the bolt out that goes through the mount and jack motor up on that side and replace the mount.
Drain the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Remove the water from the cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
This is an indication that your heater core is leaking. To stop the leaking you will have to replace the heater core or stop using your heater.
Drain the coolant, remove the glove box and base to the dash. youll find the heater core on the passanger side.
The 1991 Chevy Lumina is fuel injected and has no carburetor.
Get a manual on your car to do the job right.
BIG JOB Get a manual on your car from DISCOUNTAUTOREPAIRMANUALS/COM and it will have pictures and everything.
I recently installed a new heater core in a 1991 G10 van. I removed the heater fan housing, the heater core hoses, then the compartment came out. After removing the campartment has to be taken apart to replace the core. Alot of work but not all that hard.
If you use the motor mounts off of the 1991 explorer also, it will fit and transmission should line up if it is same size motor. If going from a automatic to a standard, you will have to replace the flywheel.