Remove the high pressure bracket bolt from the pump then proceed to bend the pipe up then down (hammer and long screwdriver or punch required) until the pipe snaps off to reveal the union which is covered by the bracket on the pipe. Once the pipe and pesky bracket are out of the way it is then possible to remove the 18mm union with a flex head ratchet and 18mm socket. Then you can proceed to replace the union with the Ford upgraded/improved union and then fit the new high pressure pipe.
By getting a Focus
How do you replace power steering pressure hose on a 1993 geo prizm
Remove the wiring harness from the 2003 Jeep Liberty pressure switch. Remove the power steering pressure switch retaining screws. Reverse the process to install the new power steering pressure switch.
draing power steering fluid before changing high pressure line silverado v8
streering is hard
you can, but you will blow the seals in the steering ,and then have a bigger problem that you have now
Remove the plug on the bottom of the power steering fluid pump. Drain the power steering fluid out. Replace the plug to the bottom of the power steering pump. Replace the power steering fluid.
Power steering pressure switch.Power steering pressure switch.
unscrew the old one, then screw the new one in..?
No but if your mechanic wants to replace both he is probably ripping you off. Replace one or the other. If problem persists you replaced wrong one.
What have to do replace the belts water pump power steering
No there is a lot of pressure in the hi pressure hose,you will need to replace hose.