Want this question answered?
On a jeep that new i would check the fuse panel and repace the fuse for the horn. The horn shouldn't be defective but if the fuse doesn't solve the problem, have dealer replace horn under warranty.
Just for kicks check the voltage going to the horn, but I am prett sure you'll just need to replace the horn itself.
repair horn
On a 2007 Jeep Liberty Sport, it is located very low behind the bumber on the drivers side. ----
That is possible, The "clockspring" is the wiring connection under the steering wheel.That is possible, The "clockspring" is the wiring connection under the steering wheel.
The wiring to the horn is shorting out at times. Check the horn relay, and the wiring to find where the system shorts when the Jeep brakes.
Yes. Remove the existing horn or horns, attach your new horn and connect the horn wires. The horn wires will probably have a JEEP wire plug on the end that will need to be removed or altered.
So what is the question about your 1991 Wrangler horn?
The horn on the 1997 Jeep is located on the steering wheel. The actual sound part (horn) is located under the front right side of the front bumper. If you stand in front of the jeep and stick your hand in the left most cutout hole on the bottom of the plastic bumper cover, you can touch the dual horns as well as remove them and replace them.
where could i find the horn fuse in elentra 2007???
Under the hood there is a 5 in. Long bl. Box to the left facing the jeep. There are fuses in it, the horn fuse is in there....good luck..
The horn relay is located in the fuse box under the hood of the 2007 Chevy Tahoe. The horn relay is responsible for making the car horn have sound.