answersLogoWhite

0


Best Answer

It's easy, remove the 4 Allen head screws holding the L shaped cover on the front of the engine . Its the cover that has the engine size printed on it. after u remove it u should be able to see 3 coils, each with 2 small bolts holding them down and a grey plug in the right side of each, just take the 2 bolts out ( a size 8mm or 5/16 as I recall) unplug the wire and lift the coil straight out, go ahead and replace the plug while u are there, its a 5/8 plug socket, then reverse the process to replace and you are in business. The rear are a bit harder to get to but still very doable, just look at the rear after u replace the front coils and u will be able to spot them on the rear top of the engine, goodluck

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the ignition coils on a 1999 Maxima GLE what should it cost to have it done?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the power transistor unit on a 1999 Nissan maxima?

Follow the ignition coils from the spark plugs to the distributor then follow the wires from there to the transisitor unit. it should be marked with an X


How do you change ignition control module 1995 Buick Riviera?

Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.


How much is a cost to replace ignition coils on a land rover 09 LR two?

It costs $4,500 to $5,000 to replace ignition coils on a land rover 09 LR two


How do you replace the ignition coil of an Alero?

Should be about 4-6 bolts holding the coils down to the ignition module, unscrew them bolts and then pull the coils up from ignition module, but disconnect your ground to your battery first and with precise placement, the plug wires as well


How do you replace ignition coils on a 92 Chevy Cavalier?

try ehow.com


If you have a code that keeps coming up on my 1999 Nissan maxima se and it is p1320 what part would correct problem?

The most common cause that will trigger the P1320 code is the ignition coils. One or more ignition coils may have failed.


How do you tell what ignition coil is bad on 1999 maxima?

Unplug ignition coils one at a time until you find the one that doesn't effect the rpm's.That's the one that's bad.


Show you how to replace ignition coils for a ford Expedition 2003?

98 expedition


How do you replace ignition coil Audi A4?

Pull the plastic cover off the top (head) of your engine the coils are lined up on the top of your engine. Next you will need to unplug the coils from the connecting wires. After you unplug them you can simply pull the ignition coils out and replace them with your new ones.


How do you replace the ignition coil on a 1994 caprice?

take the air filter housing off on left side the ignition coils


How do you change the coils on a Mazda RX8?

remove the intake up to the throttle body. after that you should be able to see the coils on the drivers side of the engine. remove the bolt and replace. don't mix the ignition wires.


Why does my car shudder when it shifts from low gear?

You should replace the ignition coils(8).I suggest you order from online autoparts store and replace yourself.The coil is around $60.00 each and easy to replace it.