get on eBay (got mine used for $14) looks brand new and is as bright as my winning smile. i offer this advise only because when i finally got the !@#$%^&* temperature control cable out and breaking it, i took apart the entire climate control dash unit only to find that there is only a couple of bulbs (which were working) that illuminate the entire line of button lights, and the light from the bulbs is transmitted through these little wire looking fiber-optic things, (designed by Honda for the purposes of profit gain post warranty period and only available through the dealer for about $$$$$$$).i say again EBAY(or a wrecking yard).
There are no shortcuts for this repair. You have to remove the entire dash. Its located on the pasenger side behind the dash just above the radio and climate controls.
Remove the cover around the controls and you will see the bulbs inside the climate control unit. It just pulls off.
Pancreas
It is located behind the dash to the left of the radio/heater controls.
The blower resistor has failed. The resistor is located behind the glove box.
follow the 2 hoses that go into the firewall-drivers side hose should be the heater core--on the 95 T100 it is located behind the controls for the heat and air--
You can't just replace the lights you would have to replace the whole control cluster.
No they are not. The hazard flasher should be located in the fuse panal. While the turn signal flasher is located behind the dash near the AC controls. Can be a pain to find and replace.
If you mean the lights behind the clock and the climate controls, they are T05.You will find all types of lights used in your Peougeot 206 in this site: http://206gti.net/lightsThere are also tutorials on that site on how to replace the bulbs.
Its located behind the fuse box
It's located behind a panel under the heater controls (assuming it's a mk4)
The ECM is located inside your center console behind the controls.