Very carefuly
Well cable could be froze up. Replace the clutch cable. If cable is working adjust cable. If the clutch cable is adjusted then it's time for a new clutch
the only way i can find to set mine is move the cable out a little.
How do you replace a speedometer cable on a 1984 Yamaha virago xv1000
video on how to replace parking brake cable in ford escape 2003
Really ain't no fixing a brake cable. Replace it with a new cable.
If the parking brake cable is stuck, it is probably rusted in place. Try squirting WD-40 into the cable itself. If not, you will have to replace the cable.
Sadly, I'm answering my own question. What I did was cut the cable 6" from the brake drum. Important note: the parking brake cable NOT the brake line. After I cut the cable I removed the 6" section of cable and the spring from inside the drum, then sprayed a liberal amount of PB Blaster which allowed the brake to release. Now my P.O.S. drives again. For now....
The Ford expedition emergency brake cable is held in place with swivel nuts on each end of the cable. Turn the swivel nuts to the left, to remove the cable. Reverse the process to install your new emergency brake cable.
Sound like you have a e-brake cable that is frozen. Take cable off at wheel end and if cable retracts then look inside the brake assemble. If it don't, replace the cable.
Follow the cable down to a reservoir adjacent to the steering head.
Your GMC Suburban emergency brake release cable is held in place with a swivel nut on each end of the cable. Loosen the swivel nut to remove the cable. Reverse the process to install the new emergency brake release cable.
very carefully