This requires a lot of inspection and background knowledge, and would take me several hours to type out a procedure that would end up with you having safe brakes
I recommend you visit your local library and copy the procedure from a Haynes or Chilton manual.
The brakes are the same as on the 1500 series pick ups or s15 pickups.
i was wondering how to change rear brake drums for 1999 Chevy venture
Rebuild the rear drums. Or maybe yank on the cable under the body.
Normal leak points that are hard to see are inside the rear drums, along the frame, and into the brake booster.Normal leak points that are hard to see are inside the rear drums, along the frame, and into the brake booster.
How do you change rear brake drum on a 2004 Chevy Venture?
Either warped rotors or drums can cause pulsating. Apply the parking brake slowly while going about 15mph and see if t pulsates. If it does, it is the drums that need turning. If not, it is the rotors that need turning.
You either have a axel seal leaking gear oil or a wheel cylinder leaking brake fluid. A large amount of brake dust can cause this also. Remove brake drums and inspect.
Pads or shoes worn beyond usable. Replace pads and rotors or shoes and drums as needed.
Pads on front. Drums on the rear.
Be sure the e-brake cables are free and the e-brake cable adjustment is backed off.
The front have pads, and the back have drums. If you are needing to replace them, they cost around 60. What is it you needed to know?
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
Depends on the vehicle and grade of drum you want to buy.