Loosen the bolt on the tensioner pulley until the pulley freely slides along it's track. Put the belt on, paying close attention to the diagram that should be on the inside of your hood on a sticker. If you don't have one, don't worry, the belt will only fit when it is "wrapped" the correct way. Once you get the belt on, it will still be pretty loose. You will need to tighten it using the tensioner pulley. Make sure the tensioner pulley is tightened down completely.
You don't repair a serpentine belt. You replace the worn or broken belt with a new one.
The cost to replace the timing belt on a 2003 Mitsubishi Eclipse is about $700. This will depend on what else needs to be replaced and the dealer that you use.Ê
99000 miles
Loosen the belt tensioner. Make sure that the belt can be removed easily. Replace the belt with a new one. Check that belt is clean before installing. Clean the pulleys if you have to. Tighten the belt tensioner to set proper tension.
the 4g63t does not have a serpentine belt, it has drive beltS
Find the tensioner assembly, get a ratchet or breaker bar and a socket which will fit the nut, turn it counterclockwise. That'll create enough slack to allow you to remove the serpentine belt.
it is the belt by the alternator belt
how do you route the alternator and ac belt on a 2001 Mitsubishi eclipse
Changing the serpentine belt on a 97 Mitsubishi Diamante is a fairly easy task. All you need to do is get a wrench and loosen the tension pulley and pull of the serpentine belt.
Replace serpentine belt on Chevy avalanche?HOW
How do you replace the serpentine belt in 1997 sunfire
for a 95 eclipse it cost $399 parts and labor.