Purchase a belt and the tensioner ( I like the NAPA part for this) Using the correct wrench remove the old tensioner (located below the alternator between the engine and the fender well) Locate and view the diagram near the water pump. Route the new belt as illustrated reinstall the new tensioner. Start the car, run for two minutes. Shutdown and check your work.
i wnt to know how to dis-assemble a transmission in a 1996 chevy lumina
get your mama to do it
it doesn't have one
remove the 2 bolts andharness
First and foremost, make sure you have a diagram before removing the old belt. If there isn
A 1996 Chevy Lumina transmission will hold four and a half quarts of oil. A 1996 Chevy Lumina will also hold 12 quarts of transmission fluid.
No, they are 2 totally different bodystyles
This Is A Difficult Job, Take It To A Garrage. It Will Save A Lot Of Headache And Money.
1) located right above the battery. 2)on the passenager side when you open the door its on the side of the dash
The fuse box is on the passenger side of the dash board open the passenger side door and you will see it on the side
I just want to see a picture of the chevy lumina pushrod
how to change timing cover gasket on a 1996 chevy lumina