Remember the order of spark plug wires while connected. Disconnect spark plug wires. Make sure that there is no sand or dirt around before removing the plugs. Remove the spark plugs. It's a good idea to have a magnetic spark plug socket.
Insert a new spark plug in the socket, be careful, do not drop the plug. Usually plugs come with preset gap and do not need adjustment. If you change gap most likely you will have to get a new spark plug. Install spark plugs. The torque should be around 45 N*m. Connect the wires in the order. Start the engine.
how to change spark plugs on a 97 mercury mountaineer
Remove each of the coils then remove and replace the plugs
Some people never change them. Overall practice to change spark plugs and its wires when you replace the timing belt.
97-99 4 cylinder BKR6EKPB-11
Put Denso or NGK plugs and they will already be gapped within exceptable specs out the box
6 spark plugs
Torque the spark plugs to 11 lb/ft.
To change spark plugs a person must start with a car that is off, then disconnect the batter. The person must then remove the spark plug cables, remove the spark plugs, and replace them with new spark plugs. After that, one must put the spark plug cables back in the correct order, then connect the battery.
generally on a Toyota 3.0 either in a Camry or an Avalon you need to remove the upper intake- also known as the plenium- to gain access to the back spark plugs. You will need to make sure that you have a new gasket for the plenium to avoid any vac. leaks
where is the location of the spark plugs on a 97 BMW 318 ti.
1342
Where and how do you find the spark plugs for a 1997 ford expedition?