Follow the top radiator hose back to the engine. There is where the t-stat housing is. Remove the hose, remove the housing, remove the old t-stat and o-ring. Install the t-stat into the intake manifold with the spring side toward the engine, and lay the new o-ring on top. Reinstall everything and be careful to evenly tighten the housing bolts until they are snug(DO NOT RAUNCH HARD ON THE BOLTS). Fill the cooling system with a 50/50 mix of coolant and water, and burp the system.
How do you replace the timing chain on a 1994 mercury grand marquis
how to replace starter on 2000 mercury grand marquis
how do you get to and replace the wiper moter on a 97 marquis
how do you replace the front sway bar likn in a 1999 Grand Marquis?
The thermostat is located on the front of the engine under the elbow at the end of the radiator hose
Replacing the thermostat on a 1996 Grand Marquis is not very hard. First, follow the upper radiator hose to find the thermostat. Then disconnect the hose and drain it. After the hose is drained, remove the bolts holing the thermostat housing in place. Take the old thermostat out and replace with a new one.
Mercury Grand Marquis was created in 1983.
take it to the dealer
Because the plastic housing is cracked. That is what happened to mine.
Check the engine end of the upper radiator hose
On a 1999 Mercury Grand Marquis : The Original Equipment engine cooling thermostat would have been ( around 192 * Fahrenheit )
change wiper motor grand marques