I have found that most S10 (GM) wiper motor trouble is caused by a faulty pulse board, not the motor itself. It is easy to replace and your local auto parts store can sell you an aftermarket pulse board for aprox $20. The wiper motor does not have to be removed to change the pulse board. Unplug the wire harness from the motor, remove the three small screws holding the cover to expose the pulse board then wiggle the board straight out. Reverse order to install.
How to replace wiper motor on a 1998 montero sport mitsubishi
The wiper motor on a 1998 Chevy Venture is up under the vents next to the windshield. It is bolted to the firewall.
Begin by removing the traveling arm retaining bolt from your 1998 Chevrolet Cavalier wiper motor. Remove the wiper motor retaining bolts. Remove the wiper motor wiring harness. Reverse the process to install your new wiper motor.
there is small circuit board mounted on wiper motor. Circuit board available at Chevy Dealers or IWI motor parts. No need to remove motor but micro stubby screw drivers needed to remove and replace. worked great.
The relay is attached to the bracket that holds the wiper motor to the hatch.
how to replace wiper transmission assembly on a 2001 tracker
To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.
It is attached directly to the wiper motor. Remove the three small screws that hold a black plastic cover on the wiper motor. The pulse board is under that cover. Most of your wiper motor problems are from a faulty pulse board.
Yes they interchange
Under the hood, on the firewall, drivers side.
Dead spot in the motor replace the motor.
how do you replace a wiper control module in dodge 1998