how do i change the ball joint on my 2008 f150
It will take and experience mechanic six hours to replace your 1996 Chevy truck flywheel. A novice mechanic will take several more hours.
It will take approximately 15 minutes, per wheel, for an experience mechanic to change the brake pads and the rotor. A novice mechanic, doing the job in their driveway, will take considerably longer.
I do not recommend the novice mechanic doing any work on the ac components. But if you want to do this get it discharged and then special tools to undo the connectors. Basically it.
There's not enough room here to answer your question. This is no job for a novice mechanic. You're going to need specialized tools and experience. Take it to a tranny shop.
Is a very complicated and detailed process. The procedure should not be attempted by a novice mechanic. A complete instruction manual can be obtained from most auto-parts stores.
The starter is located under the intake manifold. While it is not a difficult job it is a bit complicated. So, if you are a novice mechanic you might want to get some experienced help.
This engine is fuel injected and does not have an old style choke. Take it to a shop and have them look at it. Not a job for a novice.
They can be rebuilt but not by a novice. Replace it with a rebuilt unit.
Novice means beginner; newly menber of something or someone. Ex. I am a novice in Christ.- meaning I am a beginner as a christian. Hope this helps.
A novice should not try to replace a shock strut. The strut spring needs to be compressed, in order to remove it. The compressed shock spring will be under several hundred pounds of pressure. This can create a very dangerous situation for the novice.
A novice
Depending on how novice you can go after the waterpump, if you have other transportation. The Astro has a timing chain, and I wouldn't replace it as a maintenance item, you'll be getting over your head if your not careful.