Most or all years of Buick LaSabre have hook-end wiper arms. Be sure to get the correct replacement wipers and they usually will have step-by-step, illustrated instructions. Normally there's a little tab where the wiper blade is inserted in the the wiper arm hook. Press the tab and pull the wiper blade out of the hook. See video for Hook-End Arms below.
Check www.autozone.com, they have a Repair Info section that covers Buick LeSabre with this info.
does not have one......in wiper motor
How to replace Wiper Blades on 2003 Dodge grand caravan ?
replace 2009 acura rl wiper blades
The 1994 Buick LeSabre has fairly unique "1/4" side lock" wiper arm attachments. See the Sources and Related Links section below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Its very easy.
How do you replace the wiper blades on a 2006 Mercedes C230 Sport
The wiper blades on a 1994 Buick LeSabre should both measure 22 inches in length. Start on the driver's side wiper, and find the small clip holding the blade onto the arm. Disconnect the blade by unclipping that small clip. To install the new blade, line up the hook in the right direction and lock it into place. The same procedure can be taken on the passenger side blade.
No, They don't You can have them replace and install wiper blades for about 14 Bucks
No it isn't very expensive to replace the wiper blades. It is anywhere from 8-20 dollars.
Procedure will vary depending on what model 2003 Buick you have. Take a close look at the wiper arm/blade attachment area. The view videos below in the Sources and Related Links section.
The Buick LeSabre has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Without the model year, I cannot give you very specific informtion but trust me, its very, very easy to do.