1) Get in MPV with ignition key, and all fobs for the vehicle.
2) Close all doors and remove ignition key if it is in ignition.
3) Open driver's door
Note: Steps 4 and 5 must be completed in under thirty seconds.
4) Repeat the following three times
a) Insert ignition key
b)Turn ignition switch to on and then to lock
c) Remove ignition key
5) Repeat the following three times
a) Close driver's door
b) Open driver's door
Locks should all lock and then unlock within a couple of seconds--you'll hear the clicking sound
6) Press any button two times within five seconds on fob being programmed.
Locks should again lock and unlock
7) Repeat step 6 for all other fobs being programmed. When done with last fob, wait a few seconds and then you should be done with the reprogramming. Each fob should now work for this vehicle.
Seems silly, but it works. Just did it!
I am delighted to confirm it really does - and so simple. Thank you.
I, too, can confirm that it works; just did it for a 2002 Mazda MPV. (The local battery store did not know this trick but recommended an internet search because different manufacturers have different tricks; often a key fob won't work immediately after a battery replacement.)
This worked for my 2003 Mazda MPV also
Worked on my 2004 MPV! Thank you!
You will need a scan tool to program this Keyless Fob.
Take it to the dealer.
Hi, Try this web site www.programyourremote.com according to the site you have to hold the remote buttons for up to 30 seconds. .... Joe.
if it has power door locks then it should have keyless remotes
I have just replaced some batteries in my 2001 ml 320 keyless remote and its not activating my security system. How do I get the remote to work again? Please help!!!
eBay
You can program the keyless entry remote, for your 2001 Saturn L200, by holding the unlock and lock weapons at the same time. The red light will flash on and off. The remote will be programmed when the red light stays illuminated.
how or where can i purchase a new auto mate remote contrl for my 2001 toyota sequoia
see also 2004 silverado
the batterys in your keyless remote may need to be changed
If you're asking about adding a NEW keyless remote, only a dealer can do that. It's a very specialized piece of equipment that can add the new remote to your vehicle's computer. If you're asking about RE-programming your keyless remote after replacing the battery, check the inside cover of the remote. It should give instructions on how to solve your problem.
You can program a 2001 Chevrolet Camaro by locking then unlocking the door locks.